Manufacturing

Procurement software for manufacturers, built for every plant you run

Your maintenance teams buy bearings, belts, tooling and safety supplies every day, often with the line down and no time to wait. ProcureDesk gives them a fast, approved way to order from the plant floor, sets a budget for each site, and shows finance every commitment across your plants before the invoice arrives.

4.8/5 on Capterra and GetAppLive in 2 to 4 weeksBeside your ERP, not instead of it
Illustrative data: committed spend by plant this month. 0 invoices arriving with no PO, Plant 1 MRO and spares $38K of $45K on track, Plant 2 tooling $12.6K of $12K over and routed for approval, urgent Line 3 bearing request approved from mobile in 6 minutes with the PO sent to the vendor
Aeon
Metabolon
Funai Lexington
Coast Flight
myDNA
Chattahoochee Hills Charter School
Aeon
Metabolon
Funai Lexington
Coast Flight
myDNA
Chattahoochee Hills Charter School
Aeon
Metabolon
Funai Lexington
Coast Flight
myDNA
Chattahoochee Hills Charter School
Aeon
Metabolon
Funai Lexington
Coast Flight
myDNA
Chattahoochee Hills Charter School
Fit check first

Who this is for, and who it isn't

Search "manufacturing procurement software" and most of what comes back is built for direct materials: bills of materials, supplier quality and sourcing events. ProcureDesk does a different job. It controls everything your plants buy to keep running, from the request to the payment. Here's the line, before you spend time on a demo.

✓Built for you if

  • You run two or more plants or facilities, and you're the Controller, VP of Finance or plant finance lead who gets the call when spend doesn't add up
  • Maintenance and operations teams buy MRO parts, tooling, safety supplies and repairs by phone, email or card, and the PO shows up after the invoice, if at all
  • Each plant has its own vendors and its own prices for the same parts, and you only find out when the GL entries don't match
  • Plant managers approve repairs and equipment spend without a defined limit, and finance hears about it weeks later
  • Your accounting runs on QuickBooks, Sage Intacct, NetSuite, Business Central or Xero
  • You couldn't tell me today what each plant has committed on MRO this month without a day of digging

—Look elsewhere if

  • You need an MRP or production planning system. ProcureDesk doesn't run your bill of materials, schedule production or manage direct materials planning. Your ERP keeps doing that
  • You want CMMS or work-order software for maintenance scheduling. That's a separate category
  • You run one small shop with a handful of purchases a month. The controls here are more than you need
The problem

Production can't wait, so purchasing doesn't

A $300 bearing that keeps a production line running can't sit in an approval queue for two days. So the maintenance team calls the vendor, promises a PO number later, and the invoice arrives weeks after the part.

01

"Production is down" becomes the reason for everything

The urgency is real for some purchases. Over time it becomes the explanation for every purchase that skipped the process, including the routine ones.

02

Every plant buys its own way

Plant 1 has bought from a local distributor for years. Plant 2 buys the same part from someone else at a different price. Finance doesn't see either relationship until the invoices land.

03

Purchasing authority nobody wrote down

A plant manager approves a $10,000 repair because the line needed it. Nobody told finance. The invoice hits two months later with no PO and no record of who signed off.

04

Invoices with no PO, every month

Without a PO and a receipt to match against, AP chases every invoice back to the person who ordered it. Month-end close stretches while they do.

05

No view of what's already committed

The cash forecast only shows what's been invoiced. Spend agreed by phone last week isn't in any system, so the number the CFO saw is already wrong.

Straight answer: ProcureDesk is procurement and AP automation for the indirect side of a manufacturing business: MRO, tooling, safety supplies, facility repairs, services and equipment. Requests are checked against the plant's budget and approved vendors before an order goes out, and the approved result posts to your accounting system. It isn't an MRP, ERP or CMMS, and it doesn't replace any of them.
How it works

Make the approved way the fastest way to buy

You set the rules for each plant, category and amount. ProcureDesk applies them before a vendor is contacted, so the order, the approval and the budget check happen in one step.

1Request

A maintenance tech opens the mobile app on the floor, picks from an approved catalog or punchout site, and submits. Routine items under your threshold are approved on the spot. Urgent requests are flagged so the approver is notified right away.

2Commit

The purchase order goes to the vendor automatically. Finance sees the commitment the moment it's made, by plant, category and vendor, not when the invoice arrives.

3Receive and match

The receiving dock confirms what arrived against the PO. When the invoice comes in, ProcureDesk matches it to the PO and the receipt, flags only the exceptions, and posts the approved, coded result to your accounting system.

How each kind of plant spend gets controlled

Spend typeTypical itemsHow it's handled
MRO and spare partsBearings, belts, motors, fittingsApproved catalogs and punchout, auto-approved within the plant budget
Tooling and consumablesCutting tools, abrasives, lubricantsApproved vendors, budget by plant and category
Safety and PPEGloves, glasses, uniformsAnnual budget per plant, tracked by category
Repairs and servicesEquipment repair, contractors, calibrationQuote attached, approval above your limit, receipt confirmed before payment
Recurring suppliesGases, cleaning, packagingBlanket POs with a set amount, drawn down as invoices arrive
Emergency buysBreakdown parts, rush ordersMobile request flagged urgent, routed for same-day approval
Invoice matching, for AP

Invoices match themselves, so AP reviews only the exceptions

By the time an invoice arrives, ProcureDesk already knows what was ordered and what the dock received. Your AP team stops hunting for packing slips and starts reviewing the few invoices that don't line up.

1

Capture

Vendors email invoices to a dedicated inbox. ProcureDesk reads the invoice data with OCR, so nobody keys it in.

2

Match

Each invoice is checked against the purchase order and the receipt: price, quantity and item.

3

Clear or flag

A clean match goes straight to approval. A mismatch is flagged with the reason, such as a price difference, a quantity gap or a missing receipt.

4

Code and post

The plant, department and GL coding captured at the request carries onto the invoice. Approved invoices post to your accounting system with no rekeying.

5

Pay

Pay by ACH, virtual card or check, or push approved invoices to Bill.com.

Direct materials too? If your ERP already creates POs and receipts for production materials, ProcureDesk can match those invoices against the PO and receipt your ERP holds, and handle indirect spend from request to payment. How manufacturers handle vendor invoice discrepancies →

Duplicate invoices are flagged before they’re paid. Late-payment fees drop because approvals aren’t waiting on one person’s inbox. Month-end close gets shorter because the match is done before the close starts. See invoice matching →

Budgets by plant

A budget for every plant, down to the category

Company-wide budgets hide the problem. The business can sit under budget on MRO while one plant burns through its allowance by spring. ProcureDesk sets the budget per plant and per category, then checks every request against what's left.

  • Set a separate budget for each plant, then split it by category: MRO, tooling, safety, repairs, facility
  • See committed spend as well as paid invoices, so next month's bills are visible this month
  • Give plant and department managers their own budget view, so they own approvals without finance chasing them
  • Roll every plant up into one view, then compare sites to find where the same part costs more
See budget management →
Illustrative example of MRO budgets across four plants, with Plant B nearly spent and Plant D over budget by $6,800.
Built for multi-plant operations

What a manufacturing finance team actually needs

Your maintenance teams aren't at desks, and your finance team is small. Everything below assumes both.

☎

Mobile requests and approvals

Techs order from the floor. Approvers act from their phone or email. Mobile app →

☰

200+ punchout catalogs

Grainger, McMaster-Carr, Fastenal, Amazon Business and more, at your contracted pricing, with the plant and budget attached to every order. Punchout catalogs →

%

Budgets by plant and category

A separate budget for each site, checked at the request, rolled up into one view. Budget management →

▣

Receiving against POs

The dock confirms what arrived before the invoice is paid, including partial shipments. Receipts and GRN →

↻

Blanket POs for recurring spend

Set an amount for gases, cleaning or service contracts and draw it down as invoices arrive. Blanket purchase orders →

⊞

One view of spend across plants

Spend by vendor, item, category and plant in one place. Reporting →

✓

Automated invoice matching

Match to the PO and receipt, flag only exceptions. Invoice matching →

⇆

Inventory for MRO spares

Track stock of the spare parts and supplies you can't run out of, and reorder before the shelf is empty. Inventory management →

The results

What finance teams see after switching

10 days to 4
to close month-end, on average across ProcureDesk customers
90% fewer
invoices arriving without a PO
7 to 10 hours
a week returned to the finance team
2 to 4 weeks
to go live, set up by ProcureDesk
In their words
Our goal was to help our managers make smarter, better decisions about where and how they spend money so that we can achieve our financial goals as a company. ProcureDesk has helped enable this, and shown us that efficiency and visibility are both key to budget management.
George Parish, COO, Funai LexingtonRead the case study →
Where we sit

Beside your ERP, posting to your accounting system

Three jobs, three systems. Knowing which one you need saves everybody a call.

1

Your ERP or MRP

Bills of materials, production planning, direct materials. Stays exactly as it is.

2

ProcureDesk

Everything you buy to keep the plants running: requests, budgets by plant, POs, receiving, invoice matching and payment.

3

Your accounting system

QuickBooks (Online, Desktop and Enterprise), Sage Intacct, NetSuite, Microsoft Business Central or Xero. ProcureDesk syncs vendors, GL codes and locations in, and posts approved invoices back with no rekeying.

The honest version: if your problem is production scheduling or bill-of-materials planning, your ERP or MRP will serve you better. If your problem is that plants buy MRO in ten different ways and finance sees it after the fact, that's where ProcureDesk earns its place. See integrations →
Go deeper

Guides for manufacturing finance teams

Guide

How procurement works in manufacturing

Read the guide →
Guide

The manufacturing procurement process for Controllers

Read the guide →
Guide

MRO procurement strategy

Read the guide →
Guide

MRO inventory management and procurement controls

Read the guide →
Guide

The $50M inflection point: manufacturing procurement maturity

Read the guide →
Case study

How Funai Lexington achieves company-wide financial goals

Read the case study →
Free assessment · 3 minutes

How much of your spend is approved before it happens?

Answer nine questions on pre-approval, PO coverage, approval automation and month-end close. See where uncontrolled spend is hiding and what to fix first.

Take the 3-minute scorecard
Interactive tool · 1 minute

See what manual AP is costing you

Enter your monthly invoice volume, minutes per invoice and AP hourly cost. You get the annual cost of processing invoices by hand, and what that looks like automated.

  • Invoices per month
  • Minutes per invoice
  • AP hourly cost
  • Annual spend
Calculate my ROI →
FAQ

Manufacturing procurement, answered

Is ProcureDesk an ERP or MRP?

No. ProcureDesk handles what you buy to keep the plants running: requests, budgets, purchase orders, receiving, invoice matching and payment. Your ERP or MRP keeps managing production planning and direct materials, and ProcureDesk runs beside it.

What manufacturing spend does ProcureDesk cover?

Indirect spend: MRO and spare parts, tooling, safety supplies and PPE, repairs and services, facility costs and equipment. For direct materials, it can match invoices against the POs and receipts your ERP already holds.

How do you control purchasing across multiple plants?

Each plant gets its own approved vendors, budgets and approval rules, all in one system finance controls. Requests route by plant, amount and category, and committed spend across every plant shows in one view.

How do emergency purchases work when a line is down?

The tech submits a request from the mobile app and flags it urgent. The approver is notified right away, and the PO is on file before the vendor ships, so the invoice matches when it arrives.

Can we set a separate budget for each plant?

Yes. Budgets are set per plant and can be split by category, such as MRO, tooling or safety. Each request is checked against what's left, and all plants roll up into one view.

How does invoice matching work?

ProcureDesk matches each invoice to its purchase order and the receipt the dock confirmed. Clean matches go to approval, and mismatches are flagged with the reason, so AP reviews exceptions instead of every invoice.

What happens to invoices that arrive without a PO?

They route to the right approver with coding attached and are tracked as spend that bypassed the PO process, so you can see which vendors and plants they come from.

Which accounting systems do you integrate with?

QuickBooks (Online, Desktop and Enterprise), Sage Intacct, NetSuite, Microsoft Business Central and Xero, plus Bill.com for payments.

How long does implementation take?

Two to four weeks. ProcureDesk's team builds your approval workflows, plant budgets, supplier catalogs and accounting integration.

Who is this built for, and who should look elsewhere?

It fits manufacturers running more than one plant or facility, and the Controllers and finance leaders who manage them. If you need an MRP, a CMMS, or you run a single small shop, ProcureDesk isn't the right fit and we'll tell you so on the call.

See it across your plants.

A 30-minute walkthrough built around your sites: your plants, your MRO categories, your approval rules and your accounting system.